Active
ASYMTEK Dual-Action Bracket
Brand
Category
Conformal Coating Equipment
The Dual-Action Bracket can be used for both single-slide and dual-slide operations, and is designed to enable the use of two conformal coating applicators. The Single-Slide configuration can be used when 35 mm of clearance is required. The Double-Slide configuration provides full overboard clearance of 70 mm. Single-Slide operation: One valve has a fixed position and the other slides up and down. Typically, the fixed side is position 1 (left side). This set up is also used when a tilt mechanism is attached to the SC-300 Swirl Coat® applicator or the SC-400 PreciseCoat® conformal coating jet. Double-Slide operation: The first slide mechanism moves up, away from the substrate while the second one moves down closer to the target area; or vice versa. These simultaneous actions allow the applicator in use to move around the work area while the idle applicator avoids tall components.