Aktif
SIPLUS ET 200SP TM ECC 2xPWM ST based on 6FE1242-6TM10-0BB1 with conformal coating
Nomor Part: 6AG1242-6TM10-2BB1
Kategori
Charging controller E-Mobility
Siemens 6AG1242-6TM10-2BB1. SIPLUS ET 200SP TM ECC 2xPWM ST based on 6FE1242-6TM10-0BB1 with conformal coating, -30…+60 °C, load controller for conductive charging of electric vehicles according to IEC61851 with 2 charging outlets; 2x Control Pilot; 2x plug present; 2x DQ switching contact for load contactor as open collector; 2x DI for feedback; load contactor or connector lock; 2x ACT for connector interlock suitable for BU type BU20-P12+A0+4B and BU20-P12+A4+0B.
Spesifikasi
Dimensions
Width20 mm
Height73 mm
Depth58 mm
Other
— Number, max.2; 1 per channel
Mounting typestandard rail
Weight, approx.32 g
Rated value (DC)24 V
usable BaseUnitsBU type B0, B1
Bus communicationYes
Mounting positionHorizontal
to SIMATIC S7-1500Yes
Number of channels2; According to IEC 61851/SAE J1772
short-circuit proofYes
Degree of pollution2
Product descriptionCommunication controller for controlling conductive AC charging according to IEC 61851
Isolation tested with707 V DC
Type of digital outputTransistor
Type of supply voltageDC
Current consumption, max.90 mA
Current consumption, typ.40 mA
IP degree of protectionIP20
Short-circuit protectionYes; electronic/thermal
Connection of a DC motorYes; Motor for connector lock
Number of analog outputs2; Control pilot acc. to IEC 61851-1 and/or SAE J1772
Number of digital inputs2; 1 per channel
Product type designationECC 2x PWM ST
Number of digital outputs2; 1 per channel
Reverse polarity protectionYes; against destruction
Digital inputs, parameterizableYes; 12 V / 24 V
— Cycle duration, parameterizableNo; 1 kHz
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Electrostatic discharge acc. to IEC 61000-4-24 kV contact discharge / 8 kV air discharge
Field-related interference acc. to IEC 61000-4-310 V/m (80 ... 1 000 MHz), 3 V/m (1.4 ... 2.0 GHz), 1 V/m (2.0 ... 2.7 GHz)
Vehicle communication according to IEC 61851Yes; MODE 3
— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)
Conducted interference due to burst acc. to IEC 61000-4-42 kV signal lines
Conducted interference due to surge acc. to IEC 61000-4-5On DC supply lines: 0.5 kV symmetrical and asymmetrical
— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *
— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air
— Against mechanical environmental conditions acc. to EN 60721-3-3Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
Conducted interference due to high-frequency radiation acc. to IEC 61000-4-610 V (0.15 ... 80 MHz)
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!
