Aktif
SIPLUS ET 200SP TM timer DIDQ 10x24V based on 6ES7138-6CG00-0BA0 with conformal coating
Nomor Part: 6AG1138-6CG00-2BA0
Kategori
Fieldbus, decentr. periphery - function-/technology module
Siemens 6AG1138-6CG00-2BA0. SIPLUS ET 200SP TM timer DIDQ 10x24V based on 6ES7138-6CG00-0BA0 with conformal coating, -40…+60 °C, time-controlled digital inputs and outputs 4 DI, 6 DQ with time stamp count, PWM, oversampling.
Spesifikasi
Dimensions
Width15 mm
Height73 mm
Depth58 mm
Other
CounterYes
Jitter, max.1 µs
— Number, max.6
Weight, approx.45 g
Current-sinkingYes; With High Speed output
Power loss, typ.1.5 W
Rated value (DC)24 V
Current-sourcingYes
— parameterizableYes; none / 0.05 / 0.1 / 0.4 / 0.8 ms
usable BaseUnitsBU type A0
Number of outputs1
to SIMATIC S7-1500Yes
Automatic encodingYes
Diagnostics functionYes
Isolation tested with707 V DC (type test)
Bus cycle time (TDP), min.375 µs
Type of digital outputTransistor
Current consumption, max.50 mA; without load
Short-circuit protectionYes; electronic/thermal
Number of digital inputs4
Product type designationTM Timer DIDQ 10x24V
Number of digital outputs6
Number of RS 485 interfaces0
Substitute values connectableYes
Suitable for safety functionsNo
Digital inputs, parameterizableYes
Digital outputs, parameterizableYes
Limitation of inductive shutdown voltage to-0.8 V
— permissible quiescent current (2-wire sensor), max.1.5 mA
— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)
— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to chemically active substances according to EN 60721-3-6Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
— to biologically active substances according to EN 60721-3-6Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request
— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *
— to mechanically active substances according to EN 60721-3-6Yes; Class 6S3 incl. sand, dust; *
— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air
— Against mechanical environmental conditions acc. to EN 60721-3-3Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
— Against mechanical environmental conditions acc. to EN 60721-3-6Yes; Class 6M4 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
Input characteristic curve in accordance with IEC 61131, type 3Yes
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!
