Active
SIPLUS ET 200SP F-PM-E 24VDC/8A PPM rail based on 6ES7136-6PA00-0BC0 with conformal coating
Part Number: 6AG2136-6PA00-1BC0
Brand
Category
Fieldbus, decentr. periphery - power supply module
Siemens 6AG2136-6PA00-1BC0. SIPLUS ET 200SP F-PM-E 24VDC/8A PPM rail based on 6ES7136-6PA00-0BC0 with conformal coating, -30…+60 °C, OT1 with ST1/2 (+70 °C für 10 minutes), fail-safe power module PROFIsafe, 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 2 safe digital inputs 1 safe digital output PPM.
Specifications
Dimensions
Width20 mm
Height72 mm
Depth55 mm
Other
Note:for use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A, Online Support article 109736776
Weight, approx.70 g
— at "0" to "1", max.20 ms
— at "0" to "1", min.0.4 ms
— at "1" to "0", max.20 ms
— at "1" to "0", min.0.4 ms
Power loss, typ.5 W
Rated value (DC)24 V
— up to 40 °C, max.8 A; note derating data in the manual
— up to 50 °C, max.6 A; note derating data in the manual
— up to 60 °C, max.4 A; note derating data in the manual
— up to 70 °C, max.4 A; note derating information in the manual; only with configured slots to the left and right of the module
— parameterizableNo
usable BaseUnitsBU type C0
Number of outputs2
Automatic encodingYes
Overload protectionYes
Diagnostics functionYes; See Chapter "Alarms/diagnostic messages" in the manual
Isolation tested with750 V DC (type test) and according to EN 50155 (routine test)
Open-circuit detectionYes
Sourcing/sinking inputYes; P-reading
Current consumption, max.21 mA; From the backplane bus
Short-circuit protectionYes
Number of digital inputs2
Product type designationF-PM-E PPM 24VDC
Number of digital outputs1
Reverse polarity protectionYes
Substitute values connectableNo
Suitable for safety functionsYes
Current consumption (rated value)75 mA; without load
permissible range, lower limit (DC)20.4 V
permissible range, upper limit (DC)28.8 V
— global warming potential, (total) [CO2 eq]88.3 kg
Power consumption from the backplane bus70 mW
Limitation of inductive shutdown voltage tomax. 1.5 V
Color code for module-specific color-coded labelCC52
— global warming potential, (during operation) [CO2 eq]76.6 kg
— global warming potential, (during production) [CO2 eq]13.1 kg
— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)
— global warming potential, (after end of life cycle) [CO2 eq]-1.37 kg
— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to chemically active substances according to EN 60721-3-5Yes; Class 5C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
— to biologically active substances according to EN 60721-3-5Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request
— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *
— to mechanically active substances according to EN 60721-3-5Yes; Class 5S3 incl. sand, dust; *
— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air
— Against mechanical environmental conditions acc. to EN 60721-3-3Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
— Against mechanical environmental conditions acc. to EN 60721-3-5Yes; Class 5M2 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
Input characteristic curve in accordance with IEC 61131, type 1Yes
— against mechanical environmental conditions in agriculture acc. to ISO 15003Yes; level 1 (Location LE) using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!
