ASYMTEK DispenseJet DJ-2200 Spray Valve

Merek

NordsonKunjungi Situs Web

Flux application using the DispenseJet® DJ-2200 spray valve delivers uniform, thin-layer dispensing of materials and superior edge definition for coating applications in flip chip and other semiconductor package The DispenseJet DJ-2200 spray valve uses a patented high-precision mechanism to dispense fine layers of fluid directly from the nozzle onto the substrate. Layer thickness consistency is aided by a built-in heater that controls the fluid temperature and facilitates the dispensing process. The syringe/reservoir is completely sealed - providing full and constant pressure at all times. This allows high-speed, non-contact dispensing of low-viscosity materials such as rosin and no-clean fluxes with sharp, clean cut-off. Coupled with a recirculation reservoir, the DJ-2200 is also used for dispensing materials such as low viscosity silver epoxy for EMI shielding applications or silicone-phosphor for LED phosphor coating. With the DJ-2200, the valve moves in an X, Y plane to dispense a variety of pre-programmed patterns that create a uniform film. The Z-axis is not required to move during or between dispense cycles. Time elapsed between cycles is minimized, and throughput and productivity are increased. Spray coating with the DJ-2200 can also improve total cost of ownership. In spray flux applications, the DJ-2200 not only provides 100% coverage with a minimal amount of flux (typically 5 µm thin layers) but also produces less residue after reflow. Less residue results in better package reliability and higher yield. In EMI spray shielding applications, the DJ-2200 has been proven to reduce overspray and significantly reduce production costs by minimizing the waste of expensive coating fluids.