Weight, approx.600 g
Rated value (DC)24 V / 48 V / 60 V
primary/secondaryYes; Electrical isolation for 230 V AC (reinforced isolation)
Status indicatorYes
Isolation tested with2 500 V DC/2 s (routine test)
Rated value at 24 V DC3 A
Rated value at 48 V DC1.5 A
Rated value at 60 V DC1.2 A
IP degree of protectionIP20
Short-circuit protectionYes
Product type designationPS 60 W 24/48/60 V DC
Equipment protection classI, with protective conductor
Reverse polarity protectionYes
permissible range, lower limit (DC)19.2 V; Static 19.2 V, dynamic 18.5 V
permissible range, upper limit (DC)72 V; Static 72 V, dynamic 75.5 V
Infeed power to the backplane bus60 W; > +60 °C max. power input 30 W
Power loss at nominal rating conditions12 W
— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)
— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to chemically active substances according to EN 60721-3-6Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
— to biologically active substances according to EN 60721-3-6Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request
— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *
— to mechanically active substances according to EN 60721-3-6Yes; Class 6S3 incl. sand, dust; *
— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!
