Active
Ground fault module with analog residual current detection for connection of a residual-current transformer 3UL23
Part Number: 3UF7510-1AA00-0
Brand
Category
Extension module for motor management device
Siemens 3UF7510-1AA00-0. Ground fault module with analog residual current detection for connection of a residual-current transformer 3UL23, max. 1 ground fault module per, for SIMOCODE pro V basic unit.
Specifications
Mechanical
Net Weight0.126 kg
Dimensions
Width22.5 mm
Height92 mm
Depth124 mm
Other
fastening methodscrew and snap-on mounting
number of inputs1
mounting positionany
number of outputs0
product brand nameSIMOCODE
product designationground fault modules
consumed active power0.1 W
response time maximum100 ms
number of analog inputs1
number of analog outputs0
number of digital inputs0
Substance Prohibitance (Date)05/01/2012
type of current for monitoringAC and pulse-shaped direct currents (type A)
number of semiconductor outputs0
relative humidity during operation5 ... 95 %
EMC immunity according to IEC 60947-1corresponds to degree of severity 3
reference code according to IEC 81346-2B
measurable line frequency initial value400 Hz
measurable line frequency full-scale value16 Hz
touch protection against electrical shockfinger-safe
reference code according to IEC 81346-2:2019B
shock resistance according to IEC 60068-2-2715g / 11 ms
tightening torque with screw-type terminals0.8 ... 1.2 N·m
vibration resistance according to IEC 60068-2-61 ... 6 Hz: 15 mm, 6 ... 500 Hz: 2g
electrostatic discharge according to IEC 61000-4-26 kV contact discharge / 8 kV air discharge
EMC emitted interference according to IEC 60947-1class A
field-based interference according to IEC 61000-4-310 V/m
tightening torque [lbf·in] with screw-type terminals7 ... 10.3 lbf·in
number of sensor inputs for ground fault detection1
number of outputs as contact-affected switching element0
field-bound HF interference emission according to CISPR11corresponds to degree of severity A
(electrically) protective separation according to IEC 60947-1All circuits with protective separation (double creepage paths and clearances), the information in the "Protective Separation" test report, No. 2668, must be observed.
relative measurement deviation of residual current transformer2.5 %
type of electrical connection for auxiliary and control circuitscrew-type terminals
diameter of inlet opening of connectable residual current transformer35 ... 210 mm
Downloads
3UF7510-1AA00-0_doc_03UF7510-1AA00-0_doc_13UF7510-1AA00-0_doc_23UF7510-1AA00-0_doc_33UF7510-1AA00-0_doc_43UF7510-1AA00-0_doc_53UF7510-1AA00-0_doc_63UF7510-1AA00-0_doc_73UF7510-1AA00-0_doc_83UF7510-1AA00-0_doc_93UF7510-1AA00-0_doc_103UF7510-1AA00-0_doc_113UF7510-1AA00-0_doc_123UF7510-1AA00-0_doc_133UF7510-1AA00-0_datasheet.pdf
